9
Configuring the system
Before using the conference phone for the first time, the
FLX2 will walk you through some configuration setup.
First, it will ask for the language to use. The six options
are English, Español (Spanish), Français (French),
Deutsch (German), Italiano (Italian), and Português
(Portuguese). Highlight the language of your choice,
and press either “Enter” or “Select” on the Dialer to
select it. Once a language is select, the system will use
that language for all screen contents. Please ensure
that you selected the right one. If the wrong language
was selected, it can be changed in the advanced setup
menu of the dialer, however you will have to navigate
through screen content in the selected language to get
there.
Once the language is selected, the system will ask for
the region or country in which the system is used. This
setting is required to configure the telephone interface of
the FLX for the requirements of that country or region. If
your country or region is not in the list, please contact
Revolabs support.
Lastly, the system will ask for date and time settings.
Please enter the current time and date.
Language, country / region, and time settings can be
changed in the menu on the dialer. The corresponding
menus are described later on in this document.
Making a call
To make a conference call, take at least one of the Microphones out of the Charger
Base, and take the Dialer out of the Charger Base. You can remove all Microphones
and the Speaker if you wish, but this is not required. Use the Dialer to enter the number
you want to call, including any leading digits your telephone connection might require.
The Speaker and any Microphone that is not in the Charger Base will be active during
the call. To finish a conference call, press the red hang-up button on the Dialer.
NOTE: It is also possible to have a conference call with the
microphones in the charger base. However, due to the
proximity of microphone and speaker at that time, audio
quality might be impacted. The maximum volume of the
speaker is limited while the microphones are in the charger
base. Microphones that are placed into the charger base are
switched off. To use microphones in the charger base for
phone calls they first have to be switched on. You do this by
