17
Initial Setup
After unpacking the FLX2 Conferencing System, there are a few initial setup tasks that
must be performed before a call can take place or any system configuration can be
changed.
Connecting System Cables
The FLX2 Base Station and Charger Base each have a power supply that need to be
connected, as shown below. In addition, the Base Station needs to be connected to the
telephone network using the provided RJ11 telephone cable before a conference call
can be made. The Base Station offers additional optional connections that are only
being used when the FLX2 System for example is connected to a video conferencing
unit or a recording device. The cables required for these connections are not included
with the FLX2 system and need to be purchased separately.
System Setup
Before using the FLX2 to make a call, some system
settings need to be selected. When taking the handset out
of the charger base, it will show a screen that asks you for
the language to be used. The six options are English,
Español (Spanish), Français (French), Deutsch (German),
Italiano (Italian), and Português (Portuguese). Please
select the language of your choice.
Note: If a wrong language was selected at this time, it can be
change it later on in the admin area in the dialer menus.
However, you will have to navigate through the menu to get to
that option using the language you selected. So be careful that
you do not select a language you are unfamiliar with.
