Yamaha Revolabs FLX2 Скачать руководство пользователя страница 57

Страница: 57 / 74

LED Indicators

Device LED Indicator

Status

Microphone in Charger Base

Steady Red

Charging

Steady Green

Fully charged

Single red flash

Active phone call, both microphones in Charger
Base, microphones muted via Master Mute or All
Mic Mute is ON

Double red flash

Active phone call, microphone(s) in Charger Base,
microphone is muted.

Green flash

Active phone call, microphone in Charger Base is
unmuted

Off

Microphone is powered off:

Microphone is not seated properly

Charger Base is powered off

Microphone not in Charger Base

Off

Microphone is powered off

Single green flash every second

On, connected, battery charged, un-muted

Two Red flashes every second

On, connected, battery charged, individually muted

Red flash every second

On, connected, battery charged, Master Mute or “All
Mic Mute” is ON, microphones muted

Alternating Yellow - Green flash

On, connected, battery low, un-muted

Alternating Yellow - Double-Red
flash

On, connected, battery low, individually muted

Alternating long Red - Yellow flash

On, connected, battery low, Master Mute or “All Mic
Mute” is ON, microphones muted

Flashing Yellow – Red – Yellow –
Green

Searching for a connection to the base.

The microphone will try to re-establish the
link for 10 minutes, then power off.

Alternating slow Red - Green flash

Microphone is not paired to a Base Station

The microphone will power off after two minutes.

Steady Red

Microphone is being powered down

Microphone is in pairing mode.

Groups of five rapid Red flashes

Microphone is in a fault condition.

Device LED Indicator

Status

Speaker in Charger Base

Steady Green

Connected, battery charging, no phone call in
progress, Microphones in Charger Base

Connected, battery charging, phone call in
progress, Microphones are not muted using All
Mic Mute or Master Mute. Microphone(s) might
still all be individually muted.

Connected, battery charging, no phone call in
progress, Microphone(s) outside of the Charger
Base unmuted

Steady Red

Connected, battery charging, phone call in
progress, Master Mute or “All Mic Mute” is ON, all

Содержание Revolabs FLX2











































































Результаты поиска

Содержание Revolabs FLX2

Отзывы:

Похожие инструкции для Revolabs FLX2

Бренды по названию

Популярные бренды

Yamaha Revolabs FLX2, Системное руководство

Результаты поиска

Содержание Revolabs FLX2

Отзывы:

Похожие инструкции для Revolabs FLX2

Бренды по названию

Популярные бренды