22
Answering an Incoming Telephone Call
1. When the FLX2 System identifies an incoming call,
it will play the ring tone through the FLX Speaker. If
the Dialer is not in the Charger Base it will play a
ring tone, too.
2. If your phone line supports caller ID, and the caller
has not suppressed their caller ID information, the
FLX Dialer will display the caller ID information for
the incoming call.
3. A call can be answered in one of three fashions.
a. Press the Green ‘Call’ button or the ‘Answer’
key on the FLX Dialer.
b. Remove a Microphone from the charger.
c. Press the mute/unmute button on a
Microphone that is already out of the
charger.
NOTE: If there is either no Speaker active or no Microphones
outside the Charger Base when the incoming call is answered
from the FLX Dialer, the call will default to ‘handset mode’
and will remain in ‘handset mode’. The call can only be
switched to ‘speaker mode’ if the speaker and at least one
microphone is switched on. If all microphones are in the
charger base at least one has to be switched on by pressing the
microphone button before the call can be changed to speaker
mode.
Ignoring an Incoming Telephone Call
1. When the FLX2 System identifies an incoming call,
it will play the ring tone through the FLX Speaker.
2. The FLX Dialer will display the caller ID information
for the incoming call.
3. A call can be ignored in one of two fashions.
a. Press the Red ‘End Call’ button on the FLX
Dialer.
b. Press the ‘Ignore’ key on the FLX Dialer.
Note: Once the user ignores the call, the system will
cease to ring, but the option to answer is available until
the caller disconnects.
