manualshive.com logo in svg

Yamaha PW50(Z), Руководство пользователя

Поделиться
Скачать
Yamaha PW50(Z) Скачать руководство пользователя страница 54

 

PERIODIC MAINTENANCE AND ADJUSTMENT

 

7-18

 

1

2

3

4

5

6

7

8

9

 

EAU23290

 

Checking the wheel bearings 

 

The front and rear wheel bearings must
be checked at the intervals specified in
the periodic maintenance and lubrica-
tion chart. If there is play in the wheel
hub or if the wheel does not turn
smoothly, have a Yamaha dealer check
the wheel bearings.

 

EAU24360

 

Front wheel 

 

EAU41022

 

To remove the front wheel

WARNING

 

EWA10821

 

To avoid injury, securely support the
vehicle so there is no danger of it

 

falling over.

 

1. Place the motorcycle on the cen-

terstand.

2. Disconnect the brake cable at the

wheel by removing the brake lever
free play adjusting nut, then re-
moving the cable from the brake
camshaft lever and brake shoe
plate.

3. Remove the axle nut and washer.
4. Pull the wheel axle out, and then

remove the wheel.

 

1. Brake lever free play adjusting nut

2. Brake camshaft lever

3. Washer

4. Axle nut

5. Brake cable

5

1

2

3

4

Содержание PW50(Z)







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды