manualshive.com logo in svg

Yamaha PW50(Z), Руководство пользователя

Поделиться
Скачать
Yamaha PW50(Z) Скачать руководство пользователя страница 52

 

PERIODIC MAINTENANCE AND ADJUSTMENT

 

7-16

 

1

2

3

4

5

6

7

8

9

 

EAU23120

 

Adjusting the Autolube pump 

 

The Autolube pump is a vital and so-
phisticated component of the engine,
which must be adjusted by a Yamaha
dealer at the intervals specified in the
periodic maintenance and lubrication
chart.

 

EAU43631

 

Lubricating the front and rear 
brake levers 

 

The pivoting points of the front and rear
brake levers must be lubricated at the
intervals specified in the periodic main-
tenance and lubrication chart.

 

EAU23192

 

Checking and lubricating the 
centerstand 

 

The operation of the centerstand
should be checked before each ride,
and the pivots and metal-to-metal con-
tact surfaces should be lubricated if
necessary.

WARNING

 

EWA11301

 

If the centerstand does not move up
and down smoothly, have a Yamaha
dealer check or repair it. Otherwise,
the centerstand could contact the
ground and distract the operator, re-

 

sulting in a possible loss of control.

 

Recommended lubricant:

 

Lithium-soap-based grease

 

Recommended lubricant:

 

Lithium-soap-based grease

Содержание PW50(Z)







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды