manualshive.com logo in svg

Yamaha PW50(Z), Руководство пользователя

Поделиться
Скачать
Yamaha PW50(Z) Скачать руководство пользователя страница 33

 

6-1

 

2

3

4

5

6

7

8

9

 

OPERATION AND IMPORTANT RIDING POINTS

 

EAU15951

 

Read the Owner’s Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.

WARNING

 

EWA10271

 

Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident

 

or injury.

 

EAU40887

 

Starting and warming up a 
cold engine 

 

1. Turn the fuel cock lever to “O” (on).
2. Set the engine stop switch to

“START”.

3. Turn the starter (choke) on and

completely close the throttle. (See
page 4-6.)

4. While applying the front or rear

brake, start the engine by pushing
the kickstarter lever down.

5. After starting the engine, move the

starter (choke) back halfway.

 

NOTICE:

 

 For maximum engine

life, never accelerate hard when
the engine is cold!

 

[ECA11041]

 

 

6. When the engine is warm, turn the

starter (choke) off and set the en-
gine stop switch to “RUN”.

TIP

 

The engine is warm when it responds
normally to the throttle with the starter

 

(choke) turned off.

 

EAU16660

 

Starting a warm engine 

 

Follow the same procedure as for start-
ing a cold engine with the exception
that the starter (choke) is not required
when the engine is warm. Instead, start
the engine with the throttle slightly
open.

TIP

 

If the engine does not start after several
kicks, try again with the throttle 1/4 to

 

1/2 open.

Содержание PW50(Z)







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды