manualshive.com logo in svg

Yamaha PW50(Z), Руководство пользователя

Поделиться
Скачать
Yamaha PW50(Z) Скачать руководство пользователя страница 24

 

4-1

 

1

2

3

4

5

6

7

8

9

 

INSTRUMENT AND CONTROL FUNCTIONS

 

EAU40660

 

Handlebar switch 

 

EAU40674

 

Engine stop switch “OFF/RUN/
START” 

 

Set this switch to “START” before start-
ing the engine. Set this switch to “RUN”
after warming up the engine or before
starting off. Set this switch to “OFF” to
stop the engine.

TIP

 

●

 

The engine cannot be started with
this switch set to the “RUN” posi-
tion.

 

●

 

The engine speed is limited while
this switch is set to the “START”
position, therefore the motorcycle

cannot be ridden in that switch po-

 

sition.

 

EAU41041

 

Speed limiter and power 
reduction plate 

 

Your motorcycle was delivered with an
adjustable speed limiter and a power
reduction plate. The speed limiter
keeps the throttle from fully opening,
even when the throttle grip is turned to
the maximum. The power reduction
plate is installed in the exhaust mani-
fold to limit the amount of power avail-
able while they learn.

 

Speed limiter

 

1. Loosen the locknut.
2. To increase the maximum engine

power available and the maximum
speed of the motorcycle, turn the
adjusting screw in direction (a). To
decrease the maximum engine
power available and the maximum
speed of the motorcycle, turn the
adjusting screw in direction (b).

 

1. Engine stop switch “OFF/RUN/START”

1

Содержание PW50(Z)







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды