28
PSR-SX600 Owner’s Manual
You can rename files/folders.
1
In the File Selection display, select the appropriate tab (User or
USB) which contains the file/folder you want to rename by using
the TAB [
E
][
F
] buttons.
2
Make sure that Name is shown at the bottom of the display.
If it is not shown on the display, press the [8
] (File) button to call it up.
3
Press the [1
] (Name) button.
The window for the Rename operation appears at the bottom of the display.
4
Move the cursor to the desired file/folder by using the Cursor
buttons [
][
][
E
][
F
], and then press the [ENTER] button.
5
Press the [8
] (OK) button to confirm the file/folder selection.
The Character Entry window is called up.
6
Enter the name of the selected file or folder (page 31).
If the file/folder name already exists, a message appears asking you if you want
to overwrite or not. If not, press one of the [6
] (No) buttons and enter
another name.
The renamed file/folder appears on the display at the appropriate position
among the files in alphabetical order.
Renaming a File/Folder
NOTE
Files and folders in the Preset tab or
the “Expansion” folder (page 47) in the
User tab cannot be renamed.
NOTE
To cancel the Rename operation, press
the [7
] (Cancel) button.
NOTICE
Do not use “Expansion” for the
folder name. Otherwise, all data
contained in the “Expansion”
folder will be lost when an
Expansion Pack (page 47) is
installed.
