41
CONF
IGUR
A
T
IO
NS
English
You can send information or the event which occurs in the system of this unit to another unit as a message (this is called
“Syslog”). “Syslog” contains information of such as start/shut down of this unit, login, the activity in normal states, the
states of an error. You can specify the level of the message if necessary.
1
In the Web menu, click “Syslog Setting”.
The “Syslog” window appears.
2
Select the desired mode(s) which specifies
the kind of the message that is sent and
click.
y
You can check marks of multiple modes to send all checked
messages.
•
Debug Mode:
Send the debug log to confirm the
inner activity when an error occurs.
•
Info Mode (default setting):
Send the operation log
such as the event or states of the activity of this
unit.
•
Notice Mode:
Send the details of the operation log
when this unit is in the normal state.
3
In the “Syslog Network Output”, click
“Enable”.
4
In the “Syslog Host Address”, enter the host
IP address of the destination unit.
5
Click “Submit”.
The syslog message specified in step 2 is sent to the
host address specified in step 4.
Confirming the System Log Message of This Unit (Syslog)
