Talking with Multiple Locations
22
The information display and speaker output method vary
depending on the settings in “Connection Mode”
(page 27) and “Speaker Mode” (page 29).
■
When the “Speaker Mode” is
set to “Divide”
The audio from each location is output from a different
position.
,
and
displayed before the IP address of
each location indicate the positions of the speakers where
the audio from respective locations are output.
y
• Also you can change the speaker output positions according to
locations, when the connection mode (page 27) is set to “Mesh”
and the speaker mode is set to “Divide”. See “Changing the
speaker output positions according to locations” (page 23).
• Each time you press
, you can switch between IP address
and setting icon shown at the top of the display. (When using an
SIP server, the display switches between SIP address, setting
icon, and IP address.)
■
When “Speaker Mode” is other than
“Divide”
The audio from other locations is not divided according to
locations, but are mixed and output as monaural audio.
The order of connections is displayed before the IP
addresses of other units.
y
See page 38 for the display during a call through the SIP server,
and see page 43 for the display in cascade connection.
Display and speaker output during
multiple connections
Menu
:Address
192.168.0.10
192.168.100.20
192.168.100.30
192.168.100.40
IP address of this unit
IP address of other units
1
2
3
4
5
6
7
8
9
0
MUTE
LAN
VOL
DC IN 12V
IN
AUDIO OUT
1
2
3
4
5
6
7
8
9
0
MUTE
LAN
VOL
DC IN 12V
IN
AUDIO OUT
Positions in 4-location call
Positions in 3-location call
Menu
:Address
192.168.0.10
[1] 192.168.100.20
[2] 192.168.100.30
[3] 192.168.100.40
IP address of this unit
IP address of other units
