38
PSR-9000
15. 015:TG1
Chk
Produces the sine wave sequence by changing the sound channels (1ch-64ch) in order from A0 toC6.
Confirm that there is no noise.
After autoscaling is finished, individual keys can be played. (If playing two or more keys simultaneously,
the key pressed first has priority to make a sound.)
When the voice switch is pressed, the tone of the voice will sound.
16. 016:TG2
Chk
Produces the sine wave sequence by changing the sound channels (1ch-64ch) in order from A0 toC6.
Confirm that there is no noise.
After autoscaling is finished, individual keys can be played. (If playing two or more keys simultaneously,
the key pressed first has priority to make a sound.)
When the voice switch is pressed, the tone of the voice will sound.
17.
017:TG3 Chk (Connection)
Produces the 1 kHz sine wave by changing the tone generators LSI.
Confirm that sound is produce at every connection.
18.
018:Pitch Chk
Connect the frequency counter to the PHONES jacks.
Check the frequency and output level.
Frequency: 440 Hz +/- 0.2 Hz
Output level: +5.4 dBm +/-3 dB
19.
019:Output R
Check the output level. (1 kHz)
PHONES(L): less than -50 dBm PHONES(R): +7.8 dBm +/-3 dB
AUX OUT(L/L+R): less than -40 dBm AUX OUT(R): +19.2 dBm +/-3 dB
LOOP SEND(L/L+R): less than -70 dBm LOOP SENDER (R): +11.3 dBm +/-3 dB
SUB1: less than -50 dBm SUB2: less than -50 dBm
20.
020:Output L
Check the output level. (1 kHz)
PHONES(L): +7.8 dBm +/-3 dB PHONES(R): less than -50 dBm
AUX OUT(L/L+R): +19.2 dBm +/-3 dB AUX OUT(R): less than -40 dBm
LOOP SEND(L/L+R): +11.3 dBm +/-3 dB LOOP SENDER (R) : less than -70 dBm
SUB1: less than -50 dBm SUB2: less than -50 dBm
21.
021:Oputput Sub1
Check the Sub1 output level. (1 kHz)
PHONES(L): less than -65 dBm PHONES(R): less than -65 dBm
AUX OUT(L/L+R): less than -70 dBm AUX OUT(R): less than -70 dBm
LOOP SEND(L/L+R): less than -70 dBm LOOP SENDER (R) : less than -70 dBm
SUB1: -11.3 dm +/-3 dB SUB2: less than -60 dBm
22.
022:Output Sub2
Check the Sub2 output level. (1 kHz)
PHONES(L): less than -65 dBm PHONES(R): less than -65 dBm
AUX OUT(L/L+R): less than -70 dBm AUX OUT(R): less than -70 dBm
LOOP SEND(L/L+R): less than -70 dBm LOOP SENDER (R) : less than -70 dBm
SUB1: less than -60dBm SUB2: -11.3 dm +/-3 dB
29.
029:EQ Low
Check the output level of EQ-low frequency. (65.4 Hz (C1))
PHONES(both L, R): +3.3 dBm +/-3 dB
AUX OUT(both L/L+R, R): +15.8 dBm +/-3 dB
LOOP SEND(both L/L+R, R): +7.1 dBm +/-3 dB
SUB(both 1, 2): +13.8 dBm +/-3 dB
30.
030:EQ Mis
Check the output level of EQ/Mid frequency. (523 Hz (C4))
PHONES(both L, R): +4.6 dBm +/-3 dB
AUX OUT(both L/L+R, R): +16.6 dBm +/-3 dB
LOOP SEND(both L/L+R, R): +8.0 dBm +/-3 dB
SUB(both 1, 2): +14.8 dBm +/-3 dB
31.
031:EQ High
Check the output level of EQ-High frequency. (4186 Hz (C7))
PHONES(both L, R): +3.7 dBm +/-3 dB
AUX OUT(both L/L+R,R): +15.6 dBm +/-3 dB
LOOP SEND(both L/L+R, R): +7.2 dBm +/-3 dB
SUB(both 1, 2): +13.9 dBm +/-3 dB
32.
032:SP MUTE
When the [NEXT/BACK] button is pressed, check that the 1 kHz sine wave tone from the speaker
stops. Press it again and the sound will come back on.
During this test, the external output terminal signal will remain on the entire time.