Yamaha Portatone PSR-5700, Расширенные функции

Страница: 26 / 79

26
Other Functions
+ – + –
HARMONY
TYPE
OCTAVE
CHANGE
TRANSPOSE/
TUNE
s
t
< >
A. B. C. MODE
“COMMON ……Piano 1 ‡
PitBend=0 TouchSens=0
FUNCTION
EXIT
F1: CUSTOM VOICE EDIT
F2: REVERB / EFFECT
F3: CONTROLLER / KEY VELOCITY
F4: SPLIT POINT / I.A. / S.S.P.MODE
F5: DISK
F6: UTILITY / MIDI
FUNCTION
EXIT
The PSR-5700 [FUNCTION] button selects 6 groups of functions that access single or
multiple display “ pages ” of parameters. Here ’ s a list of the functions and the manual page
numbers on which they are described in detail.
[F1]
Custom Voice Edit ..........................27
[F2]
Reverb Type ...................................35
Effect Type ......................................36
[F3]
Controller ........................................37
Key Velocity ....................................37
[F4]
Split Point ........................................40
Interactive Accompaniment............. 40
Super Style Play Mode ................... 41
[F5]
Disk .................................................42
[F6]
Utility ...............................................49
MIDI ................................................50
General Function Selection & Editing Procedure
The left and right arrows select
other parameters within the same
page (if available).
The up and down arrows select
different display “ pages. ”
These buttons set the
right parameter*.
These buttons set the
left parameter.
■
The [EXIT] Button
Each of the function groups selected by the [FUNCTION] button includes several display
“pages.” These are accessed by using the [
s
] and [
t
] buttons. Furthermore, in some cases a
display page have more parameters than fit in a single screen. The different screens are
accessed by using the [
<
] and [
>
] buttons.
Each display screen will have a maximum of two parameters, and these can be adjusted by
using the [-] and [+] buttons immediately below each parameter. Pressing both the [-] and [+]
buttons simultaneously will generally set the “normal” value for the selected parameter.
* Some functions have only one parameter which will be shown to the left of the display. In such
cases the right [-] and [+] buttons will have no effect.
The [EXIT] button can be used at any time to exit from a function and return to the normal
play mode.
“ Not Available in SEQ! ” may appear on the lower display line when a function button is pressed in the
sequencer, custom accompaniment programmer, DOC, or GM mode (depending on the mode, “ SEQ ”
in the display may be replaced by “ CUS ” , “ DOC ” , or “ GM ” ). If this message appears, the selected func-
tion cannot be accessed or edited.
DETAIL