Yamaha PM1D Manager V2 Скачать руководство пользователя страница 22

PM1D Manager V2 for Windows Owner’s Manual

22

USB MIDI Driver

If you are connecting the console/engine to a USB port on your PC, you’ll need to install the Yamaha USB 
driver. If this driver is already installed, or if you will be using a serial connection (RS-232-C connector), you 
do not need to install the USB driver.

The procedure for installing the Yamaha USB driver 
depends on the version of Windows that you are using.

Windows 2000

1. Start your PC and Windows, log on as the Adminis-

trator, and then insert the included CD-ROM into 
your PC’s CD-ROM drive.

2. Go to My Computer

Control Panel

System

Hardware

Driver Signing

File Signa-

ture Verification, select “Ignore-Install all files, 
regardless of file signature,” and then click OK.

3. Power-off the console/engine, and use a USB cable 

to connect the console/engine to the PC.

The USB connector of the console/engine is located 
in the PC CONTROL section of the rear panel.

4. Turn on the console/engine.

The Found New Hardware Wizard appears.

5. Click Next.

6. Select “Search for a suitable driver for my device 

(Recommended),” and then click Next.

7. In the subsequent window, select “CD-ROM 

drives” only, and then click Next.

You may be prompted to insert your Windows CD-ROM. 
Do not insert it! Click OK, and in the “Copy files from” sec-
tion of the subsequent dialog box, enter “D:\USBdrv2k_” 
(replacing “D” with the drive letter of your CD-ROM 
drive), and then click OK.

The driver is installed, and the message “Completing 
the Found New Hardware Wizard” appears.

8. Click Finish, and then restart your PC.

Windows XP

1. Power-on the PC, and when Windows starts up, log 

in using an account with Administrator privileges.

2. Insert the included CD-ROM into your PC’s CD-

ROM drive.

3. Click the Start button, and then click Control 

Panel.

If the Control Panel window appears as shown 
below, click “Switch to Classic View” on the left side 
of the window in order to see all the control panels.

4. Go to System Hardware

Driver signatures

Driver signature options, select “Ignore-Install 
software without asking for confirmation,” and 
then click OK.

5. Click OK to close the System Properties window, 

and then click the Close button to close the Control 
Panel window.

6. Power-off the console/engine, and use a USB cable 

to connect the console/engine to the PC.

The USB connector of the console/engine is located 
in the PC CONTROL section of the rear panel.

7. Turn on the console/engine.

The Found New Hardware Wizard appears.

8. Select “Install software automatically (recom-

mended) (I),” and then click Next.

The driver is installed, and the message “Completing 
the Found New Hardware Wizard” appears.

9. Click Finish, and then restart your PC.

PC

Driver

PM1D 

Manager

Console/engine 

(CS1D/DSP1D)

USB cable

Содержание PM1D Manager V2

























Отзывы: