Parameters
22
■
INS DryWet (Insertion Dry/Wet Balance)
Range: -127 — +127 (“****”: not available)
This determines the balance between the direct, unprocessed signal (dry) and the Insertion-processed
sound (wet).
■
INS Offset (Insertion Offset)
Range: -64 — +63 (“****”: not available)
This parameter is used to change one specific parameter of the effect; the particular parameter
depends on the effect type.
■
INS Drive (Insertion Drive)
Range: -127 — +127 (“****”: not available)
This determines the amount of distortion overdrive for the PLG150-PF’s built-in Insertion effect.
■
INS ClpCrv (Insertion Clipping Curve)
Range: -127 — +127 (“****”: not available)
This determines the amount of distortion “edge” for the PLG150-PF’s built-in Insertion effect. Higher
values result in harder edged distortion.
■
INS Delay (Insertion Delay Time)
Range: -7149 — +7149 (“*****”: not available)
This determines the delay time for the PLG150-PF’s built-in Insertion effect.
●
Keep in mind that these parameters are offset controls; the actual resulting effect sound will differ
from voice to voice. If the currently selected voice does not have any effect or uses an effect type
not corresponding to this parameter, the parameter is unavailable and is indicated by asterisks
("***") in the display.
●
Whether this Insertion effect parameter is available or not depends on the selected voice and its
pre-assigned Insertion effect types. (For details on the effect types and parameters for each voice,
see the Preset Voice List on page 24 and the Effect Parameter List on page 30.)