PJP-EC200 Setup Procedure
4
When
Not
Using
the
Public
-Address
System
Follow the procedure below to output the talker’s voice (on your side) only from the
speakers in the other end (no output from your side).
*
Italic texts
indicate a procedure which you need to perform using the web menu.
Installations and Connections
Setup
1.
Connect a microphone to MIC/LINE INPUT.
1)
Make sure the GAIN level is set to the minimum.
2.
Connect speakers with built-in amplifier to LINE OUTPUT.
1)
Make sure the speaker volume is set to the minimum.
3.
Connect CONFERENCE IN to the headphone output jack of your PC.
4.
Connect CONFERENCE OUT to the microphone input jack of your PC.
5.
Connect the AC adapter to DC IN.
6.
Connect the power cable to the AC adapter.
12
13
14
11
