Yamaha Nexo NXAMP4X4 Скачать руководство пользователя страница 46

Страница: 46 / 91

MENU DESCRIPTION

Input Patch

By default and depending on the selected speaker setup selected, some or all of the four

inputs will be patched to the outputs. For example, 4 independent channels setups (like 4 x

PS15) will use each analog input patched to each output, but 4 way active setups (like

Alpha) will use only one analog input patched to all the outputs.

Most of the time, the user can freely change the way inputs are patched to the outputs.

However, in some special circumstances, like cardioids setups for example, it is mandatory

to have same signal feeding two channels of amplifier or more. In this situation, changing

the patch for one channel will automatically affect the other channels.

First step to change the input patch is to go to the OPTION menu (see above). Then select

the sub-menu “2.Input Patch”.

Then the following menu depends if you have a digital input card fitted into the expansion

slot of the NXAMP. If not, then the next menu will directly appear. If yes, you will be

prompt to select whereas you want to edit the analog input patch or the digital input patch.

Choose Input patch to edit InPatch
[Analog ][Digital]

Note: You can only edit or view one type of input at a time (analog or digital), but both

type of input can be mixed for each channel. To do so edit first the analog patch for

example and then go to the digital input patch page.

Once this menu is selected, select the channel you want to change the input patch, by

using the corresponding “select” button. Then only the selected channel will be displayed

alone on the bellow line of the LCD screen. You can also go back to the previous step by

depressing the “A” button.

PAGE 46 OF 91

Содержание Nexo NXAMP4X4




























































































Результаты поиска

Содержание Nexo NXAMP4X4

Отзывы:

Похожие инструкции для Nexo NXAMP4X4

Бренды по названию

Популярные бренды

Yamaha Nexo NXAMP4X4, Руководство пользователя

Результаты поиска

Содержание Nexo NXAMP4X4

Отзывы:

Похожие инструкции для Nexo NXAMP4X4

Бренды по названию

Популярные бренды