Yamaha Nexo NXAMP4X4 Скачать руководство пользователя страница 11

Страница: 11 / 91

NXAMP VERSUS NX242: WHAT’S NEW?

NXAMP versus NX242: What’s new?

The NXAMP Powered TDcontroller has been designed in order to provide ascendant

compatibility with its predecessor – the NX242 Digital TDcontroller.

What’s remaining the same?

DSP core

The DSP used in the NXAMP are from the same family (same core) than the one used in

NX242 and on the NXTENSION board. Thus algorithms such as EQ will perform exactly the

same on both platforms to allow the user to mix NXAMP and NX242 with traditional

amplifiers at the same time. However, computing ressources are higher on the NXAMP (see

further), thus some setup will perform only with this hardware.

Level and latency

Global delays due to analog to digital and/or digital to analog as well as global gain are

identical on NXAMP on one side and NX242 with 26dB gain amplifiers on the other side (of

course attenuators should be placed to 0 dB).

Also when used with Ethersound™ networks (through the optional NXES104 board) the

NXAMP has the same gain and delay from digital input to analog output than NX242-ES4

with traditional 26dB amplifier.

Please note however that both NX242 and NXAMP should have the same firmware revision

(LOAD) to be phase compatible inside a same setup.

Software

Basic MENUs and functions are more or less the same; only little learning curve is needed

to go from the NX242 to the NXAMP.

The same LOAD and NXWIN software are used to update both TDcontrollers and NXAMP

Powered TDcontroller firmware. The transition is transparent for the user. Note however,

that the NXAMP can’t be flashed with LOADs prior to 2_46, and must use NXWIN 4

software.

What’s changed?

Integrated amplifier

The most notable improvement is the integration of the amplifier module that will simplify

the cabling from the user point of view but also allow a much more efficient integration of

loudspeaker controller with the amplifier needs. Thus the digital controller becomes also an

amplifier controller. This is not simply two units inside the same box, but a powerful use of

the DSP resources for both cabinets and amplifier being driven.

PAGE 11 OF 91

Содержание Nexo NXAMP4X4




























































































Результаты поиска

Содержание Nexo NXAMP4X4

Отзывы:

Похожие инструкции для Nexo NXAMP4X4

Бренды по названию

Популярные бренды

Yamaha Nexo NXAMP4X4, Руководство пользователя

Результаты поиска

Содержание Nexo NXAMP4X4

Отзывы:

Похожие инструкции для Nexo NXAMP4X4

Бренды по названию

Популярные бренды