28
MW12
●
ST CH (9/10,11/12)
HI,MID,LO EQ Gain control
: CENTER
AUX1,AUX2 level control
: MAX
AUX1 PRE switch
: OFF (POST)
BAL control
: L (turned counterclockwise fully)
ON switch
: ON (LED shall light) when taking measurement only/ OFF otherwise
PFL switch
: ON (LED shall light) when taking measurement only/ OFF otherwise
1-2 switch
: ON when taking measurement only/ OFF otherwise
Fader
: MAX
●
MASTER control
GROUP1-2 Master Fader (60mm)
: MAX
GROUP1-2 TO ST assign switch
: OFF
STEREO Master Fader (Stereo 60mm)
: MAX
AUX1,AUX2 SEND Master Level control
: MAX
RETURN to AUX1,AUX2,ST Level control
: MAX
C-R/PHONES level control
: MAX
C-R OUT source select switches
: ST
2TR IN/USB level control
: MIN
2TR IN/USB switch
: OFF (TO ST)
●
Others
PHANTOM switch
: OFF
3.2
Indicator Inspection
Check if the POWER LED will light when the unit is turned on.
3.3
Gain
In the state 3.1, the output levels shall be within the range specified in the Table 3.3-1 - 3.3-6.
*1 Measure with the PAN control set at the center position. For others, turn the PAN control counterclockwise
fully for the ST L and the odd number of GROUP OUT and turn it clockwise fully for the ST R and the even
number of GROUP OUT.
*2 PFL switch to ON.
*3 Set the 1-2 switch to ON and the ST/GROUP. Measure only the case of CH1.
*4 Measure only the case of CH1.
* The difference in the level between channels shall be 2dB or less.
INPUT
INPUT
Gain
ST L OUT
ST R OUT
GROUP1 - 2
AUX1
AUX2
C-R OUT
*2
C-R OUT
*3
Level
PRE OFF
PRE ON
Mic
-80
Max
+1 +/-2
*1
+1 +/-2
*1
+4 +/-2
+6 +/-2
-4 +/-2
+6 +/-2
+0 +/-2
+20 +/-2
GROPU TO ST, 1-2 SW ON
+14 +/-2
*4
+14 +/-2
*4
--
--
--
--
--
--
-36
Min
+1 +/-2
*1
--
--
--
--
--
--
--
Line
-54
Max
+1 +/-2
*1
--
--
--
--
--
--
--
Table 3.3-1 CH INPUT(1-4) [dBu]
q
INPUT
INPUT Level
Gain
INSERT OUT
REC OUT L
REC OUT R
1-4/8
Mic 1-4/8
-80
Max
-20 +/-2
--
--
CH INSERT IN 1
0
Unspecified
--
+2.2 +/-2
+2.2 +/-2
CH INSERT IN 2-4/8
0
Unspecified
--
+2.2 +/-2
--
Table 3.3-2 [dBu]
