manualshive.com logo in svg

Yamaha MU128, Руководство пользователя

Yamaha MU128 - каждому владельцу необходимо ознакомиться с Owner's Manual перед использованием. Скачать бесплатно этот manual можно на manualshive.com. MU128 обеспечивает высококачественное звучание и удобное управление, делая его идеальным выбором для музыкальных проектов любого жанра.

Поделиться
Скачать
background image

128

MU128 Multi Mode

Filter Parameters

LPF Cutoff Frequency (LPF Cutoff)

Range:

–64 — +63 (XG mode), 000 —
127 (TG300B mode)

This determines the cutoff frequency of
the low pass filter (LPF) for the selected
drum sound. The LPF filters out frequen-
cies higher than the cutoff point and
“passes” the lower frequencies. Lower
cutoff values create a deeper, more
rounded tone, while higher values create
a brighter tone. (For more information,
see LPF Cutoff Frequency on page 112.)

LPF Resonance (LPF Reso)

Range:

–64 — +63 (XG mode), 000 —
127 (TG300B mode)

This determines the amount of filter reso-
nance or emphasis of the LPF Cutoff Fre-
quency above for the selected drum
sound. Higher values make the filter ef-
fect more pronounced and stronger, cre-
ating a resonant peak around the cutoff
frequency. (For more information, see
LPF Resonance on page 112.)

Velocity LPF Cutoff Sensitivity (VelLPFSens)

Range:

–16 — +16

This determines the degree to which the
LPF Cutoff Frequency for the selected
drum sound changes in response to ve-
locity. In other words, you can shift the
LPF Cutoff Frequency of the filter up or
down (and thus change the timbre of the
sound) depending on how hard or soft you
play the keys of a connected keyboard.
Positive values raise the LPF Cutoff Fre-
quency and negative values lower it. A
value of 00 results in no frequency
change, whatever velocity is received.

Multi Edit Mode

Chorus Send (Cho Send)

Range:

000 — 127

This determines the level of the selected
drum sound that is sent to the Chorus ef-
fect. A value of 000 results in a completely
“dry” drum sound, no matter how much
Chorus is applied to the Drum Part.

NOTE
Keep in mind that the Chorus effect must be
properly enabled and set for this parameter to
work as intended. (See page 88.) Also, the pa-
rameters Chorus Send in Single Part control
(page 107) and Chorus Return in All Part con-
trol (page 109) must be set to appropriate val-
ues.

Variation Send (Var Send)

Settings:

off, on (when Variation Con-
nection is set to INS);
000 — 127 (when Variation
Connection is set to SYS)

When the Variation Connection parameter
(page 150) is set to “INS,” this determines
whether the Variation effect is applied to
the selected drum sound or not.
When the Variation Connection parameter
(page 150) is set to “SYS,” this determines
the level of the selected drum sound that is
sent to the Variation effect.
A setting of “off” or “000” results in no
Variation effect being applied to the drum
sound.

NOTES

• Keep in mind that the Variation effect must

be properly enabled and set for this param-
eter to work as intended. (See page 90.)

• When the Variation Connection parameter

(page 150) is set to “INS,” the “Variation Send”
parameter in the Single Part controls (page
108) must also be set to on in order to use
the Variation effect.

• When the Variation Connection parameter

(page 150) is set to “SYS,” the parameters
“Variation Send” in the Single Part controls
(page 108) and “Variation Return” in the All
Part controls (page 110) must be set to ap-
propriate values.

Содержание MU128




































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MU128

Camoga C 420 Instruction Manual preview
C 420
Бренд: Camoga Страницы: 43
Seneca Z201-H Quick Start Manual preview
Z201-H
Бренд: Seneca Страницы: 4
Icy Box IB-CVB513 Quick Installation Manual preview
IB-CVB513
Бренд: Icy Box Страницы: 2
Lika HMC59 Quick Start Manual preview
HMC59
Бренд: Lika Страницы: 2
CYP CM-397M Operation Manual preview
CM-397M
Бренд: CYP Страницы: 16
Midea MOB31-12HFN1-QRD0GW Service Manual preview
MOB31-12HFN1-QRD0GW
Бренд: Midea Страницы: 65
Eleris EM303B User Manual preview
EM303B
Бренд: Eleris Страницы: 184
MDS Power IPSi2400X Installation & Operation Manual preview
IPSi2400X
Бренд: MDS Power Страницы: 16
REI UHD-PRO104 Manual preview
UHD-PRO104
Бренд: REI Страницы: 4
Marshall Electronics BC-0909-AD User Manual preview
BC-0909-AD
Бренд: Marshall Electronics Страницы: 2
Danfoss VACON NXP FI9 Operating Manual preview
VACON NXP FI9
Бренд: Danfoss Страницы: 172
Znshine Solar ZXM6-H120 Mounting Manual preview
ZXM6-H120
Бренд: Znshine Solar Страницы: 14
Mini Gadgets OmniInverter User Manual preview
OmniInverter
Бренд: Mini Gadgets Страницы: 20
MYERS LV Series Manual preview
LV Series
Бренд: MYERS Страницы: 19
Fulling DZB200J User Manual preview
DZB200J
Бренд: Fulling Страницы: 47
Lab 12 DAC1 Owner'S Manual preview
DAC1
Бренд: Lab 12 Страницы: 8
Swecoin TTPM2 Technical Specifications preview
TTPM2
Бренд: Swecoin Страницы: 34
ensol EM2V/2.0 Installation Instruction preview
EM2V/2.0
Бренд: ensol Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды