manualshive.com logo in svg

Yamaha MU128, Руководство пользователя

Yamaha MU128 - каждому владельцу необходимо ознакомиться с Owner's Manual перед использованием. Скачать бесплатно этот manual можно на manualshive.com. MU128 обеспечивает высококачественное звучание и удобное управление, делая его идеальным выбором для музыкальных проектов любого жанра.

Поделиться
Скачать
background image

PRECAUTIONS

13

English

• Do not place object in front of the instrument's air vent, since this may

prevent adequate ventilation of the internal components, and possibly
result in the instrument overheating.

• Do not operate the instrument for a long period of time at a high or

uncomfortable volume level, since this can cause permanent hearing
loss. If you experience any hearing loss or ringing in the ears, consult a
physician.

■ 

REPLACING THE BACKUP BATTERY

• This instrument contains a non rechargeable internal backup battery

which permits internal data to remain stored even when the power is off.
When the backup battery needs replacing, the message “Battery Low!”
will display in the display. When this happens, immediately back up
your data (using an external device such as the floppy disk-based
Yamaha MIDI Data Filer MDF3), then have qualified Yamaha service
personnel replace the backup battery.

• Do not attempt to replace the backup battery yourself, in order to prevent

the possible serious hazards. Always have qualified Yamaha service
personnel replace the backup battery.

• Never place the backup battery in a location that a child can reach, since

a child might accidentally swallow the battery. If this should happen,
consult a physician immediately.

■ 

SAVING USER DATA

• Save all data to an external device such as the Yamaha MIDI Data Filer

MDF3, in order to help prevent the loss of important data due to a
malfunction or user operating error.

Yamaha cannot be held responsible for damage caused by improper
use or modifications to the instrument, or data that is lost or destroyed.

Always turn the power off when the instrument is not in use.

P R E C A U T I O N S

 PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep these precautions in a safe place for future reference.

 

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not open the instrument or attempt to disassemble the internal parts

or modify them in any way. The instrument contains no user-serviceable
parts. If it should appear to be malfunctioning, discontinue use
immediately and have it inspected by qualified Yamaha service
personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, or place containers on it containing liquids which might
spill into any openings.

• If the AC adaptor cord or plug becomes frayed or damaged, or if there is

a sudden loss of sound during use of the instrument, or if any unusual

smells or smoke should appear to be caused by it,  immediately turn off
the power switch, disconnect the adaptor plug from the outlet, and have
the instrument inspected by qualified Yamaha service personnel.

• Use the specified adaptor (PA-6 or an equivalent recommended by

Yamaha) only. Using the wrong adaptor can result in damage to the
instrument or overheating.

• Before cleaning the instrument, always remove the electric plug from

the outlet. Never insert or remove an electric plug with wet hands.

• Check the electric plug periodically and remove any dirt or dust which

may have accumulated on it.

 

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not place the AC adaptor cord near heat sources such as heaters or

radiators, and do not excessively bend or otherwise damage the cord,
place heavy objects on it, or place it in a position where anyone could
walk on, trip over, or roll anything over it.

• When removing the electric plug from the instrument or an outlet, always

hold the plug itself and not the cord.

• Do not connect the instrument to an electrical outlet using a multiple-

connector. Doing so can result in lower sound quality, or possibly cause
overheating in the outlet.

• Unplug the AC power adaptor when not using the instrument, or during

electrical storms.

• Before connecting the instrument to other electronic components, turn

off the power for all components. Before turning the power on or off for
all components, set all volume levels to minimum.

• Do not expose the instrument to excessive dust or vibrations, or extreme

cold or heat (such as in direct sunlight, near a heater, or in a car during
the day) to prevent the possibility of panel disfiguration or damage to
the internal components.

• Do not use the instrument near other electrical products such as

televisions, radios, or speakers, since this might cause interference which
can affect proper operation of the other products.

• Do not place the instrument in an unstable position where it might

accidentally fall over.

• Before moving the instrument, remove all connected adaptor and other

cables.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint

thinners, solvents, cleaning fluids, or chemical-impregnated wiping
cloths. Also, do not place vinyl, plastic or rubber objects on the
instrument, since this might discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on the instrument,

and do not use excessive force on the buttons, switches or connectors.

(3)-3

Содержание MU128




































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MU128

NAD C 390DD Module Installation Manual preview
C 390DD
Бренд: NAD Страницы: 3
YASKAWA A1000 Series Product Replacement Manual preview
A1000 Series
Бренд: YASKAWA Страницы: 44
ZIEHL-ABEGG ZETADYN 3C Technical Information preview
ZETADYN 3C
Бренд: ZIEHL-ABEGG Страницы: 22
PowerConnections SCP3 Fitting Instructions Manual preview
SCP3
Бренд: PowerConnections Страницы: 10
All-Power APG3105 Owner'S Manual preview
APG3105
Бренд: All-Power Страницы: 35
B&B Electronics 422LPCOR Specification preview
422LPCOR
Бренд: B&B Electronics Страницы: 2
Growatt MAX 175KTL3-X HV Installation & Operation Manual preview
MAX 175KTL3-X HV
Бренд: Growatt Страницы: 37
YOKOGAWA JUXTA MG1 PT User Manual preview
JUXTA MG1 PT
Бренд: YOKOGAWA Страницы: 4
Tektronix P6701A Instruction Manual preview
P6701A
Бренд: Tektronix Страницы: 74
TechNexion Vizionlink PCIE-VL-3120 Quick Install Manual preview
Vizionlink PCIE-VL-3120
Бренд: TechNexion Страницы: 2
Badger Power Electronics BPE-HI-3.6K User Manual preview
BPE-HI-3.6K
Бренд: Badger Power Electronics Страницы: 29
Axis AXIS Q7401 Installation Manual preview
AXIS Q7401
Бренд: Axis Страницы: 114
Black Box RGBSplit-2 Manual preview
RGBSplit-2
Бренд: Black Box Страницы: 10
Moog Prizm 200750 Series User Manual And Installation Manual preview
Prizm 200750 Series
Бренд: Moog Страницы: 12
Delta Electronics Delphi E48SR05012NRFA Datasheet preview
Delphi E48SR05012NRFA
Бренд: Delta Electronics Страницы: 15
Telrad Integrated Multi-Application Generator User Manual preview
Integrated Multi-Application Generator
Бренд: Telrad Страницы: 61
Omnitron Systems Technology FlexPoint TR User Instructions preview
FlexPoint TR
Бренд: Omnitron Systems Technology Страницы: 1
MPP Solar 2424LV-HS User Manual preview
2424LV-HS
Бренд: MPP Solar Страницы: 46

Бренды по названию

Популярные бренды

Загрузить еще бренды