Instrument and control functions
5-36
1
2
3
4
5
6
7
8
9
10
11
12
13
electronic racing suspension.
Compression damping force and
rebound damping force
The compression and rebound damp-
ing forces are electronically controlled
and can be adjusted from the MENU
screen. See ERS on page 5-19 for in-
formation on how to adjust these set-
tings.
Spring preload
The spring preload adjustment is per-
formed manually.
1. Loosen the locknut.
2. Turn the adjusting nut in direction
(a) to increase the spring preload.
Turn the adjusting nut in direction
(b) to decrease the spring preload.
The spring preload setting is deter-
mined by measuring distance A.
The longer distance A is, the high-
er the spring preload; the shorter
distance A is, the lower the spring
preload.
Use the special wrench in the
tool kit to make the adjustment.
3. Tighten the locknut to the specified
torque.
NOTICE:
Always tighten
the locknut against the adjust-
ing nut, and then tighten the
locknut to the specified
torque.
[ECA10122]
NOTICE
ECA10102
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
1. Spring preload adjusting nut
2. Locknut
3. Special wrench
1. Distance A
(a
(a)
(a)
(b
(b)
(b)
1
1
2
2
3
3
1
Spring preload:
Minimum (soft):
Distance A = 0.0 mm (0.00 in)
Standard:
Distance A = 4.0 mm (0.16 in)
Maximum (hard):
Distance A = 9.0 mm (0.35 in)
Tightening torque:
Locknut:
25 N·m (2.5 kgf·m, 18 lb·ft)
BGG-9-10-E0.book 36 ページ ２０２２年１月２６日 水曜日 午前１１時３７分
