background image

EAU55803

For your best ownership experience, think 

Genuine Yamaha!

Genuine Yamaha  Parts

 – Genuine Yamaha replacement parts are the exact same parts as the ones originally 

equipped on your vehicle, providing you with the performance and durability you have come to expect. Why settle for 
aftermarket parts that may not provide full confidence and satisfaction?

Genuine Yamaha  Accessories

 – Yamaha only offers accessories that meet our high standards for quality and 

performance. Buy with confidence, knowing your Genuine Yamaha Accessories will fit right and perform right – right 
out of the box.

Yamalube

 – Take care of your Yamaha with legendary Yamalube oils, lubricants, and care products. They’re formulated 

and approved by the toughest judges we know: the Yamaha engineering teams that know your Yamaha from the inside 
out.

Genuine Yamaha Service Manuals

 – Get the same factory manual for your vehicle that the technicians at your 

authorized Yamaha dealer use. Service manuals are available through your Yamaha dealer or you can order them 
directly through yamahapubs.com (for US consumers only).

Genuine Yamaha products are available only from your Yamaha dealer.

Find out more at:
For US consumers, please visit yamaha-motor.com
For Canadian consumers, please visit yamaha-motor.ca

B5Y-28199-11_cover.indd   3

2022/09/07   13:02:22

Содержание MT-10 2023







































































































































Отзывы: