background image

•  Explanation of Graphical Symbols

The exclamation point within an equilat-
eral triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.

The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to
persons.

10. Power Sources — The appliance should be connected to a

power supply only of the type described in the operating
instructions or as marked on the appliance.

11. Grounding or Polarization — The precautions that should be

taken so that the grounding or polarization means of an
appliance is not defeated.

12. Power-Cord Protection — Power-supply cords should be

routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention
to cords at plugs, convenience receptacles, and the point where
they exit from the appliance.

13. Cleaning — The appliance should be cleaned only as recom-

mended by the manufacturer.

14. Nonuse Periods — The power cord of the appliance should be

unplugged from the outlet when left unused for a long period
of time.

15. Object and Liquid Entry — Care should be taken so that

objects do not fall and liquids are not spilled into the enclosure
through openings.

16. Damage Requiring Service — The appliance should be ser-

viced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the

appliance; or

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally or

exhibits a marked change in performance; or

E. The appliance has been dropped, or the enclosure dam-

aged.

17. Servicing — The user should not attempt service the appliance

beyond that described in the operating instructions.

SAFETY INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF 

ELECTRIC SHOCK, DO NOT REMOVE 

COVER (OR BACK). NO USER-SERVICEABLE 

PARTS INSIDE. REFER SERVICING TO 

QUALIFIED SERVICE PERSONNEL.

C A U T I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

1.

Read Instructions — All the safety and operating instructions
should be read before the appliance is operated.

2.

Retain Instructions — The safety and operating instructions
should be retained for future reference.

3.

Heed Warnings — All warnings on the appliance and in the
operating instructions should be adhered to.

4.

Follow Instructions — All operating and use instructions
should be followed.

5.

Water and Moisture — The appliance should not be used near
water – for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool, and
the like.

6.

Carts and Stands — The appliance
should be used only with a cart or stand
that is recommended by the manufac-
turer.

6A An appliance and cart combination

should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance and cart combination to
overturn.

7.

Wall or Ceiling Mounting — The appliance should be mounted
to a wall or ceiling only as recommended by the manufacturer.

8.

Ventilation — The appliance should be situated so that its
location or position does not interfere with its proper ventila-
tion.  For example, the appliance should not be situated on a
bed, sofa, rug, or similar surface that may block the ventilation
openings; or,  placed in a built-in installation, such as a
bookcase or cabinet that may impede the flow of air through
the ventilation openings.

9.

Heat — The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.

The above warning is located on the
bottom or rear of the unit

Содержание MSP5 - Speaker - 67 Watt

















Отзывы: