MG16/6FX
31
• DIGITAL EFFECT
PROGRAM select switch
1
PARAMETER control
MIN
AUX1,AUX2 level control
MAX when taking measurement only/ MIN otherwise
ON switch
ON(LED shall light) when taking measurement only/ OFF otherwise
PFL switch
ON when taking measurement only/ OFF otherwise
EFFECT RTN Fader
MAX when taking measurement only/ MIN otherwise
• MASTER control
ST GRAPHIC EQUALIZER gain control
CENTER
GEQ switch
ON(LED shall light) when taking measurement only/ OFF otherwise
RETURN to AUX1,AUX2,ST level control
MAX
AUX1,AUX2,EFFECT SEND Master Level control MAX
2TR IN to ST level control
MAX when taking measurement only/ MIN otherwise
GROUP1-2,3-4 TO ST assign switch
OFF
GROUP1-2,3-4 Master Fader (60mm)
MAX
C-R/PHONES level control
MAX
C-R OUT source select switches
ST
STEREO Master Fader (Stereo 60mm)
MAX
• Others
PHANTOM switch
OFF
2-3.
Unless otherwise specified, the input signal shall be 1kHz sine wave.
2-4.
The input signal impedance shall be 150 ohms.
2-5. Indicator Inspection
POWER LED shall light when the unit is turned on.
2-6. Gain
The output levels shall be within the range specified in the Table 2.6.1 to 2.6.6.
*1 Measure with the PAN control set at the center position. For others, turn the PAN control counterclockwise fully for the ST
L and the odd number of GROUP OUT and turn it clockwise fully for the ST R and the even number of GROUP OUT.
*2 PFL switch to ON.
*3 Set the 1-2 (3-4) switch to ON and the C-R/PHONES Output and Meter Select switch to GROUP 1-2 (3-4). Measure only
the case of CH1.
*4 Measure only the case of CH1.
Table 2.6.1 CH INPUT(1-8) [dBu]
INPUT
level
-80
-36
-54
Gain
MAX
MIN
MAX
GROUP1-4
+4 +/-2
–
–
–
AUX1
-4 +/-2
–
–
–
EFFECT
+6 +/-2
–
–
–
C-R OUT
*2
0 +/-2
–
–
–
C-R OUT
*3
+20 +/-2
–
–
–
PRE OFF
+6 +/-2
–
–
–
PRE ON
-4 +/-2
–
–
–
ST L OUT
+1 +/-2 *1
+14 +/-2 *4
+1 +/-2 *1
+1 +/-2 *1
ST R OUT
+1 +/-2 *1
+14 +/-2 *4
–
–
q
INPUT
MIC
LINE
AUX2
GROUP TO ST,1-2 ON