manualshive.com logo in svg

Yamaha Majesty YP400V, Руководство пользователя, Страница: 41 / 102

Поделиться
Скачать
Yamaha Majesty YP400V Скачать руководство пользователя страница 41

 

OPERATION AND IMPORTANT RIDING POINTS

 

5-4

 

2

3

4

5

6

7

8

9

nal transmission oil and the oil filter

 

element.

1600 km (1000 mi) and beyond

 

The vehicle can now be operated nor-
mally.

CAUTION:

 

 ECA10310

 

●

 

Keep the engine speed out of
the tachometer red zone.

 

●

 

If any engine trouble should oc-
cur during the engine break-in
period, immediately have a
Yamaha dealer check the vehi-

 

cle.

 

EAU17212

 

Parking 

 

When parking, stop the engine, and
then remove the key from the main
switch.

WARNING

 

EWA10310

 

●

 

Since the engine and exhaust
system can become very hot,
park in a place where pedestri-
ans or children are not likely to
touch them.

 

●

 

Do not park on a slope or on soft
ground, otherwise the vehicle

 

may overturn.

CAUTION:

 

 ECA10380

 

Never park in an area where there
are fire hazards such as grass or

 

other flammable materials.

Содержание Majesty YP400V







































































































Отзывы:

Нет отзывов