manualshive.com logo in svg

Yamaha Majesty YP400V, Руководство пользователя, Страница: 35 / 102

Поделиться
Скачать
Yamaha Majesty YP400V Скачать руководство пользователя страница 35

 

4-1

 

2

3

4

5

6

7

8

9

 

PRE-OPERATION CHECKS

 

EAU15591

 

The condition of a vehicle is the owner’s responsibility. Vital components can start to deteriorate quickly and unexpectedly,
even if the vehicle remains unused (for example, as a result of exposure to the elements). Any damage, fluid leakage or loss
of tire air pressure could have serious consequences. Therefore, it is very important, in addition to a thorough visual inspec-
tion, to check the following points before each ride.

NOTE:

 

Pre-operation checks should be made each time the vehicle is used. Such an inspection can be accomplished in a very short

 

time; and the added safety it assures is more than worth the time involved.

WARNING

 

EWA11150

 

If any item in the Pre-operation check list is not working properly, have it inspected and repaired before operating

 

the vehicle.

Содержание Majesty YP400V







































































































Отзывы:

Нет отзывов