LS9 Editor Installation Guide
4
Installing softaware
To use LS9 Editor, you’ll need to install the following software programs. Follow the appropriate instructions below.
• DME-N Network Driver
To operate the LS9 from your computer via Ethernet, you'll need to install the DME-N Network Driver software. You'll
also need to set up DME-N Network Driver after installation. For details, refer to the "DME-N Network Driver
Installation Guide".
DME-N Network Driver is software that transfers MIDI data back and forth between your computer and the LS9 via
Ethernet cable. Connect the computer to the LS9 by using an Ethernet cable via a switching hub. When you
connect the computer to the LS9 directly, you can use either a crossover or straight cable.
• DME-N Network Driver
• Studio Manager
• LS9 Editor
You can download the latest version of DME-N Network Driver at the following website. For specific installation instructions,
refer to the installation guide included in the downloaded file.
http://www.yamahaproaudio.com/
Editor
Driver
Computer
Ethernet cable
Ethernet cable
Hub
or
Ethernet cable
LS9
