LS9 Editor Installation Guide
9
When controlling the LS9 from your computer via Ethernet, the LS9 does not operate correctly or
no sound is heard.
• Have you installed the latest DME-N Network Driver?
• Is the Ethernet cable connected correctly?
Connect the computer to the LS9 by using an Ethernet cable via a switching hub or router. When you connect the computer to
the LS9 directly, you can use either a crossover or straight cable. ...............................................................LS9 Owner’s Manual
• Is the DME-N Network Driver set up appropriately? Did you enter an appropriate IP address?
...................................................................................................................................... DME-N Network Driver Installation Guide
• Is the computer network setup appropriate?
Select
fi
[Start]
fi
[Settings]
fi
[Control Panel]
fi
[Network Connections]
fi
[Local Area Connection]
fi
[Property],
and confirm the network setup. ................................................................................... DME-N Network Driver Installation Guide
• Are the settings of the LS9 and network devices (including hubs) appropriate?
...........................................................................................................LS9 Owner's Manual or Network device's Owner's Manual
• Have you selected an appropriate network ports in the LS9 Editor?
...................................... LS9 Editor Owner's Manual
• In case the
fi
rewall function is enabled for your Windows XP SP2 Installation, an alert message will be displayed
indicating that the program is blocked during
fi
rst start-up of LS9 Editor.
In that case, please select the 'Unblock' option.
• In case the
fi
rewall Anti Virus (security) function is enabled you might experience problems controlling LS9
console.
In that case, please turn off this firewall function.
Troubleshooting
U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
© 2006 Yamaha Corporation
A0
