Yamaha HTR-62300, Руководство пользователя

Страница: 30 / 85

28
En
You can use two tuning modes to tune into a desired FM/
AM station:
■
Frequency tuning mode
You can search or specify the frequency of the desired
FM/AM station automatically or manually (see “FM/AM
tuning operations” on this page).
■
Preset tuning mode
You can preset the desired FM/AM station in advance, and
then recall the station by specifying the preset group and
number (see “Selecting preset stations” on page 29).
Note
•
Orient the connected AM loop antenna, or adjust the position of the end
of the indoor FM antenna for the best reception.
1
Press
N
INPUT
l
/
h
repeatedly so that
“TUNER” is displayed on the front panel
display.
2
Press
G
BAND to select the reception band
(FM or AM).
3
To search the station automatically, press
I
TUNING AUTO/MAN’L so that the AUTO
indicator lights up on the front panel display.
To search the station manually, press
I
TUNING AUTO/MAN’L again so that the
AUTO indicator disappears from the front
panel display.
If a colon (:) appears on the front panel display,
automatic/manual tuning is not possible. Press
D
EDIT PRESET/TUNING
to turn the colon (:)
off.
4
To begin automatic tuning, press
F
PRESET/TUNING
l
/
h
once. To tune
into the desired station manually, press
F
PRESET/TUNING
l
/
h
repeatedly.
When this unit is tuned into a station, the TUNED
indicator lights up and the frequency of the received
station is shown on the front panel display.
•
To tune into a higher frequency, press
F
PRESET/TUNING
h
.
•
To tune into a lower frequency, press
F
PRESET/
TUNING
l
.
Note
• If the signal from the station you want to select is weak, tune into it
manually.
Use this feature to store up to 40 stations (A1 to E8: 8
preset station numbers in each of 5 preset station groups).
Preset the desired stations to this unit by using the
automatic or manual station preset.
You can use the automatic preset tuning feature to store up
to 40 FM stations with strong signals in order.
1
Press
N
INPUT
l
/
h
repeatedly so that
“TUNER” is displayed on the front panel
display.
2
Press
G
BAND to select “FM” as the
reception band.
3
Press and hold
H
MEMORY for more than 3
seconds.
The preset station number as well as the MEMORY
and AUTO indicators flashes. After approximately 5
seconds, automatic presetting status from the current
frequency and proceeds toward the higher
frequencies.
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
FM/AM tuning
Overview
FM/AM tuning operations
AUTO
A AM 1440 kHz
Lights up during automatic tuning
No colon (:)
Preset FM/AM stations
Automatic station preset
AUTO TUNED
A
AM 1530 kHz
Lights up
AUTO MEMORY
A1:FM 87.50MHz
Flashes
Flashes