manualshive.com logo in svg

Yamaha GW50, Руководство пользователя

Поделиться
Скачать
Yamaha GW50 Скачать руководство пользователя страница 82

BACKING SECTION   

PATTERN MODE

PATTERN MODE

  73

PATTERN MODE

In the Pattern mode, you can select and play rhythm and accompaniment
patterns. There are 248 preset patterns covering a wide variety of musical
styles, and they feature realistic drum, bass and other accompaniment sounds.
Combined with the sophisticated chord controls of the GW50, these preset
patterns provide easy-to-use backing tracks for performing along with.

Note:

Unless indicated otherwise, all operations in the Pat-

tern mode covered below can be performed either
while the pattern is stopped or being played.

HINT

PATTERN TYPES—The patterns can be
roughly divided into groups of four types,
each designed to fill a specific role in a song.
The types are indicated by the last one or
two characters in the pattern name:

…A

— Basic pattern, used generally for the “A”

part of a song, such as the verse.

…AF — Fill in based on the basic pattern.
…B

— Variation pattern, used generally for the “B”

part of a song, such as the bridge or chorus.

…BF — Fill in based on the variation pattern.

To select the Pattern mode, press [SONG/PAT-
TERN] so that the PATTERN LED lights. (The
current pattern name appears in the display.)

IMPORTANT

The operations covered in this section on the
Pattern mode pertain specifically to the Pattern
mode. Make sure that the Pattern mode has been
selected before trying each operation.

Selecting and Playing Patterns

Operation —

1.

Using 

[

6

 CURSOR]

, move the arrow in the

display to the PTN (Pattern) box.

2.

Use the 

[–]

/

[+]

 buttons to select the desired

pattern number. (Refer to pages 144 and 145
for a list of the available patterns and their
descriptions.)

Note:

Only the odd number patterns from 1 – 239

(the basic patterns) can be selected here in the
Pattern mode. Fill in patterns (even numbered
patterns from 2 – 240) cannot be selected
here; however, once a basic pattern has started,
the companion fill in pattern for that basic
pattern can be played by pressing Pedal Switch
3. (See page 77 for details.) Patterns 241 –
248, which include the special Retrigger, Ending,
Metronome and Blank patterns, can all be
selected.

3.

To play the selected pattern, press 

[START/

STOP]

.

Содержание GW50







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды