manualshive.com logo in svg

Yamaha GW50, Руководство пользователя

Поделиться
Скачать
Yamaha GW50 Скачать руководство пользователя страница 31

22  

DEMO MODE — PLAYING THE DEMONSTRATION SONGS

GUIDED TOUR (TUTORIAL)

The Song or Pattern Demo begins playing
once you press the appropriate button.
(The 

[START/STOP]

 LED flashes.)

3.

While the Song Demo or Pattern Demo is
playing back, try playing your guitar along
with the song or pattern.

You’ll notice that some effect program

changes have been recorded to the Demo,
automatically changing the sound as you
play.

If you’ve selected the Pattern Demo, you

can change chords as it plays by pressing
Pedal Switches 1 – 4. The following chords
have been assigned to the Pedal Switches:

DEMO MODE — 

PLAYING THE DEMONSTRATION SONGS

The GW50 features a special Demo mode that showcases some of the interesting
things that can be accomplished by using the Backing patterns and the song recording
functions. The Song Demo plays continuously through preset songs 1 to 6, while the
Pattern Demo plays various patterns in succession. Try playing along on your guitar
with both of the demos, since they feature some effect program changes as well.

To use the Demo mode:

1.

Simultaneously hold down 

[SONG/PAT-

TERN]

 and press 

[START/STOP]

.

Note:

The Demo mode cannot be entered from the Memory

Edit modes (EDIT/COMPARE LED is lit or flashes).
In this case, exit the Memory Edit modes (see pages
30, 53).

(You can abort or exit the Demo mode at this
stage by pressing any of the mode buttons.)

2.

Select the Song Demo by pressing 

[SET-A]

(below “SONG” in the display), or the Pat-
tern Demo by pressing 

[SET-B]

 (below

“PTN” in the display).

C

Am

F

G

Select Pattern Demo

Select Song Demo

Содержание GW50







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды