manualshive.com logo in svg

Yamaha GW50, Руководство пользователя

Поделиться
Скачать
Yamaha GW50 Скачать руководство пользователя страница 103

94

BACKING SECTION   

SONG MODE

SONG JOB MODE

5.

Press 

[START/STOP]

 to begin recording.

Recording will start from the point selected,
continue to measure B, go back to measure
A, and repeat between A and B indefinitely.

6.

Press 

[START/STOP]

 to stop recording.

7.

To turn off the repeat function, simultane-
ously hold down 

[SHIFT]

 and press 

[A-B

REPEAT]

 again.

SONG JOB MODE

Copying Measures Between A
and B

This function allows you to copy the data between
the two marked measures to another location in the
song. This is a convenient composing tool, since it
lets you easily copy parts of the song that are
similar (such as the verse sections), without having
to program each measure.

Operation —

1.

Mark the A and B points of the measures you
wish to copy.

2.

Use the position controls to select the desti-
nation measure.

3.

Simultaneously hold down 

[SHIFT]

 and press

[MEAS COPY]

. (You can still use the posi-

tion controls to select the destination measure
here, if you wish.)

4.

Press 

[SET-B]

 (below “

GO

”) to copy the

measures, or press 

[SET-A]

 (below “

EXIT

”)

to abort the operation.

Note:

In the Copy and Delete operations, the

measure numbers for the A and B points do not
change after the operations, but the actual
contents may be altered.  For this reason, you
should be careful when copying the same
section to different parts of the song, for exam-
ple; the desired section may have been moved
from its original location because of a Copy or
Delete operation.

Notice that this operation inserts the measures at
the destination and shifts all existing measures
there forward toward the end of the song to make
room for the copied measures.

Deleting Measures Between A
and B

This function allows you to delete a specified
range of measures from a song.

Operation —

1.

Mark the A and B points of the measures you
wish to delete.

2.

Simultaneously hold down 

[SHIFT]

 and press

[MEAS DEL]

.

3.

Press 

[SET-B]

 (below “

GO

”) to delete the

selected measures, or press 

[SET-A]

 (below

“

EXIT

”) to abort the operation.

Original measures 17 and beyond are moved forward 
the end of the song to make room for the copied measures.

Before copying

Содержание GW50







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды