manualshive.com logo in svg

Yamaha GW50, Руководство пользователя

Поделиться
Скачать
Yamaha GW50 Скачать руководство пользователя страница 18

PANEL CONTROLS AND TERMINALS

  9

PANEL CONTROLS AND TERMINALS

In Song/Pattern mode: For decreasing the

value at the cursor position (for example,
Tempo or Pattern).

In Memory mode: For moving backward through

the effect programs, one by one (when the
cursor arrow is not shown in the display).

In Manual and Memory Edit mode (sub pa-

rameters, MIN VOL, and AUTO VOL): For
decreasing the value of the selected sub
parameter (when the cursor arrow is at the
bottom of the display).

  • With [SHIFT] (in the Song/Pattern modes):

For turning the sound of the Backing Accompa-
niment on and off, while the song or pattern is
playing.

^

+ (BASS)

  • For increasing a selected parameter value (as

described for the modes below). Hold down for
rapid operation.
In Song/Pattern mode: For increasing the value

at the cursor position (for example, Tempo
or Pattern).

In Memory mode: For moving forward through

the effect programs, one by one (when the
cursor arrow is not shown in the display).

In Memory Edit mode (sub parameters, MIN

VOL, and AUTO VOL): For increasing the
value of the selected sub parameter (when the
cursor arrow is at the bottom of the display).

  • With [SHIFT] (in the Song/Pattern modes):

For turning the sound of the Backing Bass on
and off, while the song or pattern is playing.

&

6

 CURSOR (DRUMS)

  • In Song/Pattern modes: For moving the cursor

arrow in the display.

  • With [SHIFT] (in Song/Pattern modes): For

turning the sound of the Backing Drums on and
off, while the song or pattern is playing.

*

SONG/PATTERN (SONG REC)

  • For switching between the Song and Pattern

modes. The LED of the selected function lights.

  • With [SHIFT]: For enabling realtime recording

of a song (the LED flashes to indicate record
standby). (See pages 37, 84.)

(

START/STOP (A-B REPEAT

)

  • For starting/stopping the Backing Song or

Pattern (the LED flashes).

  • With [SHIFT]: For enabling the Repeat func-

tion. (See pages 92, 93.)

)

CHORD

  • Similar to [SHIFT], for selecting the secondary

(lower) functions of the Chord buttons. The
arrow mark pointing right (printed with the
button name) indicates the direction in which
the appropriate buttons can be found. (For
details on this and other chord-related functions,
refer to pages 74-76.)

q

Chord Buttons

  • For selecting the chord root note, or (after

pressing [CHORD] + [on/ROOT]) for select-
ing the bass note.

  • With [CHORD]: For selecting the chord type.

w

ENTER (on/ROOT)

  • In Song mode (step recording): For recording or

entering event data to a song.

  • With [CHORD]: For enabling selection of the

bass note.

Содержание GW50







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды