Yamaha GT 125 2017 страница 13 Скачать руководство пользователя | Manualshive

Страница: 13 / 80

background image

Safety information

2-4

2



This vehicle is not

d

esi

g

ne

d

to

pull a trailer or to

b

e attache

d

to

a si

d

ecar.

Genuine Yamaha Accessories

Choosing accessories for your vehicle
is an important decision. Genuine
Yamaha accessories, which are avail-
able only from a Yamaha dealer, have
been designed, tested, and approved
by Yamaha for use on your vehicle.
Many companies with no connection
to Yamaha manufacture parts and ac-
cessories or offer other modifications
for Yamaha vehicles. Yamaha is not in
a position to test the products that
these aftermarket companies produce.
Therefore, Yamaha can neither en-
dorse nor recommend the use of ac-
cessories not sold by Yamaha or
modifications not specifically recom-
mended by Yamaha, even if sold and
installed by a Yamaha dealer.

Aftermarket Parts, Accessories, an

d

Mo

d

ifications

While you may find aftermarket prod-
ucts similar in design and quality to
genuine Yamaha accessories, recog-

nize that some aftermarket accesso-
ries or modifications are not suitable
because of potential safety hazards to
you or others. Installing aftermarket
products or having other modifications
performed to your vehicle that change
any of the vehicle’s design or operation
characteristics can put you and others
at greater risk of serious injury or
death. You are responsible for injuries
related to changes in the vehicle.
Keep the following guidelines in mind,
as well as those provided under “Load-
ing” when mounting accessories.



Never install accessories or carry
cargo that would impair the per-
formance of your motorcycle.
Carefully inspect the accessory
before using it to make sure that it
does not in any way reduce
ground clearance or cornering
clearance, limit suspension travel,
steering travel or control opera-
tion, or obscure lights or reflec-
tors.

• Accessories fitted to the han-

dlebar or the front fork area can
create instability due to improp-
er weight distribution or aerody-

namic changes. If accessories
are added to the handlebar or
front fork area, they must be as
lightweight as possible and
should be kept to a minimum.

• Bulky or large accessories may

seriously affect the stability of
the motorcycle due to aerody-
namic effects. Wind may at-
tempt to lift the motorcycle, or
the motorcycle may become
unstable in cross winds. These
accessories may also cause in-
stability when passing or being
passed by large vehicles.

• Certain accessories can dis-

place the operator from his or
her normal riding position. This
improper position limits the
freedom of movement of the
operator and may limit control
ability, therefore, such accesso-
ries are not recommended.



Use caution when adding electri-
cal accessories. If electrical ac-
cessories exceed the capacity of
the motorcycle’s electrical sys-
tem, an electric failure could re-

UB21E2E0.book Page 4 Wednesday, July 19, 2017 3:56 PM

«
...
11
12
13
14
15
...
»

Содержание GT 125 2017

















































































Отзывы:

Нет отзывов

Похожие инструкции для GT 125 2017

Бренд: Maico Страницы: 13

Бренд: Tao Motor Страницы: 3

Бренд: BMW Motorrad Страницы: 143

Бренд: N-Com Страницы: 6

Бренд: P.Lindberg Страницы: 26

Бренд: A.J.S. Страницы: 104

Бренд: kellermann Страницы: 2

Бренд: BMW Motorrad Страницы: 146

Бренд: Rivco Страницы: 5

Krauser 630.2516

Бренд: hepco & becker Страницы: 6

Бренд: Dynajet Страницы: 20

Бренд: VESPA Страницы: 82

Can-Am Spyder RT

Бренд: F4Customs Страницы: 3

Бренд: Shad Страницы: 2

Бренд: Star Motorcycles Страницы: 19

Бренд: HYOSUNG Страницы: 90

Бренд: ZONGSHEN Страницы: 76

Бренд: KTM Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды