Yamaha GT 125 2017, Руководство пользователя

Страница: 67 / 80

Perio d ic maintenance an d a d justment
7-28
7
EAUW0345
Replacin g an auxiliary li g ht
b ul b
This model is equipped with two auxil-
iary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Remove cowling A. (See page
7-8.)
2. Remove the auxiliary light socket
(together with the bulb) by pulling
it out.
3. Remove the burnt-out bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the auxiliary light socket (to-
gether with the bulb) by pushing it
in.
6. Install the cowling.
EAU47742
Replacin g a front turn si g nal
li g ht b ul b
1. Remove cowling A. (See page
7-8.)
2. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
3. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with
the bulb) by turning it clockwise.
6. Install the cowling.
EAUN0490
Replacin g a tail/ b rake li g ht
b ul b or a rear turn si g nal li g ht
b ul b
If a tail/brake light bulb or a rear turn
signal light bulb burns out, replace it as
follows.
Tail/ b rake li g ht b ul b
1. Open the seat. (See page 4-11.)
2. Remove panel C. (See page 7-8)
3. Remove the bulb socket (together
with the bulb) by turning it coun-
terclockwise and pulling the tail-
light bulb socket up at an angle.
4. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
1. Auxiliary light bulb socket
1
1. Turn signal light bulb socket
1
1. Tail/brake light bulb socket
1
UB21E2E0.book Page 28 Wednesday, July 19, 2017 3:56 PM