Yamaha GT 125 2017, Руководство пользователя

Страница: 54 / 80

Perio d ic maintenance an d a d justment
7-15
7
3. Remove the element by pulling it
out.
4. Clean the element with solvent,
and then squeeze the remaining
solvent out.
5. Check the element for damage
and replace it if necessary.
6. Apply oil of the recommended
type to the entire surface of the el-
ement, and then squeeze the ex-
cess oil out.
WARNING! Use only
a d e d icate d parts cleanin g sol-
vent. To avoi d the risk of fire or
explosion, d o not use g asoline
or solvents with a low flash
point.
[EWA10432]
NOTICE:
To avoi d
d ama g in g the air filter element,
han d le it g ently an d carefully,
an d d o not twist it.
[ECA10522]
TIP
The element should be wet but not
dripping.
7. Install the element into the filter
case.
8. Place the air filter case cover in its
original position, and then install
the bolts.
NOTICE:
Make sure
that each filter element is prop-
erly seate
d in its case. The en-
g ine shoul d never b e operate d
without the filter elements in-
stalle d , otherwise the piston(s)
an d /or cylin d er(s) may b ecome
excessively worn.
[ECA10532]
Cleanin g the air filter caps an d
check hose
1. Check each cap at the bottom of
the air filter case and the hose at
the bottom of the V-belt case for
accumulated dirt or water.
2. If dirt or water is visible, remove
the hose or caps from their clamp.
3. Drain dirt or water into a proper
container.
4. Install the air filter check hose or
caps to the original position.
TIP
The air filter check hose or caps need
more frequent cleaning after riding in
the rain, washing the vehicle, or in case
of overturn. If the check hose or caps
are clogged, have a Yamaha dealer
service the vehicle.
1. V-belt air filter case cover
1. Air filter element
1
1
Recommen d e d oil:
Yamaha foam air filter oil or other
quality foam air filter oil
UB21E2E0.book Page 15 Wednesday, July 19, 2017 3:56 PM