Yamaha GRIZZLY Ultramatic YFM660FP, Руководство по обслуживанию

Страница: 335 / 408

8 - 45
CHAS
STEERING SYSTEM
●
Install the new bearings.
NOTE:
Install the outside bearing first.
CAUTION:
Do not strike the center race or balls of the
bearing. Contact should be made only with
the outer race.
●
Install a new oil seal.
NOTE:
When installing the oil seals, the “seal side” of
the oil seal faces out.
*****************************************************
CHECKING THE BALL JOINT
1.Check:
●
Ball joint
Damage/pitting
→
Replace the front arm.
Free play
→
Replace the front arm.
Turns roughly
→
Replace the front arm.
CHECKING THE TIE ROD
1.Install:
●
Tie rods (left and right)
NOTE:
The tie rod which must be installed on the out
side has grooves
1
.
T
R
.
.
25 Nm (2.5 m • kg, 18 ft • lb)
2.Adjust:
●
Toe-in
Refer to “ADJUSTING THE TOE-IN” in
CHAPTER 3.