Yamaha GRIZZLY Ultramatic YFM660FP, Руководство по обслуживанию

Страница: 110 / 408

3 - 33
CHK
ADJ
CHANGING THE COOLANT
2.Remove:
●
Plastic band
1
●
Coolant reservoir bolts
2
●
Coolant reservoir cap
3
3.Disconnect:
●
Coolant reservoir breather hose
4
4.Drain:
●
Coolant
(from the coolant reservoir)
5.Connect:
●
Coolant reservoir breather hose
6.Install:
●
Coolant reservoir bolts
●
Plastic band
7.Remove:
●
Radiator cap
1
WARNING
A hot radiator is under pressure. Therefore,
do not remove the radiator cap when the
engine is hot. Scalding hot fluid and steam
may be blown out, which could cause seri-
ous injury. When the engine has cooled,
open the radiator cap as follows:
Place a thick rag or a towel over the radia-
tor cap and slowly turn the radiator cap
counterclockwise toward the detent to
allow any residual pressure to escape.
When the hissing sound has stopped, turn
the radiator cap counterclockwise while
pressing down on it and then remove it.
8.Remove:
●
Coolant drain bolt (water pump)
1
(along with the copper washer)
9.Drain:
●
Coolant