Yamaha GP800R WaveRunner 2003, Руководство по обслуживанию

Страница: 148 / 247

6-21
E
JET
PUMP
BEARING HOUSING
2. Install:
●
Intermediate drive shaft
NOTE:
Support the intermediate housing with
steel blocks
1 and press the driven cou-
pling shaft.
3. Install:
●
Oil seal 1 [8 mm (0.31 in)]
●
Oil seal 2 [10 mm (0.39 in)]
Distance
a
:
9.5–10.5 mm (0.37–0.41 in)
Distance
a
:
10.3–10.7 mm (0.41–0.42 in)
Distance
b
:
1.6–2.0 mm (0.06–0.08 in)
Intermediate housing installation
1. Install:
●
Intermediate housing
●
Shim
NOTE:
Install the shim(s) to the original position if
the intermediate housing is not replaced.
Installation steps:
●
Install the intermediate housing.
●
Measure the clearance
a
at each bolt
hole.
●
Install the suitable shim from the table
below.
Clearance
a
Shim thickness
0–0.2 mm
(0–0.008 in)
No need
0.3–0.7 mm
(0.012–0.028 in)
0.5 mm
0.8–1.2 mm
(0.031–0.047 in)
1.0 mm
1.3–2.0 mm
(0.051–0.079 in)
1.5 mm