Yamaha FZ6-SS, Инструкция по сборке

Страница: 25 / 26

–21–
NOTE 1:
Item
Thread
Tightening
Item
size
Nm m
S
kg ft
S
lb
Rear mud guard and rear frame M6 7 0.7 5.1
Engine stop switch and frame M4 2 0.2 1.4
Coolant reserver tank bracket and stay 1, 2 M6 10 1.0 7.2
Stay 1, 2 and frame M6 10 1.0 7.2
Coolant reserver tank bracket and coolant reserver tank M6 4 0.4 2.9
Front wheel axle shaft and bolt M18 72 7.2 52
Front wheel axle pinch bolt M8 23 2.3 17
Front brake caliper and front fork M10 40 4.0 29
Front brake disc and front wheel M6 18 1.8 13
Brake caliper bleed screw M7 6 0.6 4.3
Rear wheel axle nut M24 120 12 87
Rear brake disc and rear wheel M8 30 3.0 22
Rear brake caliper bolt front and rear brake caliper bracket M8 27 2.7 20
Rear brake caliper bolt rear and rear brake caliper bracket M8 22 2.2 16
Rear wheel sprocket and rear wheel drive hub M10 100 10 72
Chain adjusting bolt lock nut M8 16 1.6 12
Rear brake hose union bolt M10 30 3.0 22
Sidestand bolt lock nut M10 46 4.6 33
Sidestand bracket and frame M10 63 6.3 46
Sidestand switch screw M5 4 0.4 2.9
Footrest bracket and frame M8 30 3.0 22
Rear brake reserver tank and coolant reserver tank bracket M6 3 0.3 2.2
Rear master cylinder and footrest bracket M8 23 2.3 17
Mainstand and nut M10 73 7.3 53
Footrest and footrest bolt M8 10 1.0 7.2
Brake pedal and brake shaft M6 8 0.8 5.8
1. First, tighten the ring nut to approximately 52 Nm (5.2 m
S
kg, 38 ft
S
lb) with a torque wrench, then loosen
the ring nut completely.
2. Retighten the lower ring nut 18 Nm (1.8 m
S
kg, 13 ft
S
lb).