Yamaha FZ6-SS, Инструкция по сборке

Страница: 10 / 26

–6–
1 Front fender 1 S
2 Bolt 2 V d = 6 (0.24),
ȏ
= 22 (0.87)
3 Bolt 2 V d = 6 (0.24),
ȏ
= 25 (0.98)
4 Collar 2 V d = 6 (0.24)
1 Bolt 1 V d = 5 (0.20),
ȏ
= 45 (1.77)
2 Bolt 1 V d = 5 (0.20),
ȏ
= 30 (1.18)
1 Bracket 1 V
2 Hexagon head bolt 2 V d = 6 (0.24),
ȏ
= 20 (0.79)
3 Master cylinder 1
4 Brake light switch connector 2
CAUTION:
WARNING
WARNING
WARNING
EAA00022
EAA00110
4. FRONT FENDER
A: Tighten the front fender bolts to
specification.
Bolt:
6 Nm (0.6 m
S
kg, 4.3 ft
S
lb)
B:
Make sure the brake hose is
routed outside of the front fend-
er.
Be careful not to scratch the
front fender with the front fork
outer tube.
Proper cable routing is essen-
tial to assure safe motorcycle
operation.
Refer to “CABLE ROUTING”.
C: Clamp the front brake hose.
EAA00032
EAA00120
5. FRONT BRAKE MASTER
CYLINDER
A: Lubricate the pivoting parts of
the brake lever.
Recommended lubricants:
Yamaha cable lube or motor
oil
B: Make sure that the “UP” mark
with the bracket is pointed up-
ward.
C: Align the punch mark on the
handlebar with the gap of the
master cylinder bracket.
D: Tighten the bolts in stages and
maintain an equal gap on each
side of the bracket to specifica-
tion.
Bolt:
10 Nm (1.0 m
S
kg, 7.2 ft
S
lb)
E: Connect the front brake light
switch connector.
F: Check the brake lever for
smooth action.
Proper cable and hose routing
is essential to assure safe mo-
torcycle operation.
Refer to “CABLE ROUTING”.
EAA00035
EAA00123
6. HANDLEBAR SWITCH
A: Align the projection on the left
handlebar switch with the hole
in the handlebar.
Proper cable routing is essen-
tial to assure safe motorcycle
operation.
Refer to “CABLE ROUTING”.
B: Tighten the bolts to specifica-
tion.
Bolt:
3.5 Nm (0.35 m
S
kg, 2.5 ft
S
lb)