–11–
V Pass the fuel tank drain hose through the clamp lo-
cated under the coolant reservoir tank.
W Route it behind the starter motor lead.
X Point the bend-R section of the throttle cable (pull
side) to the inner side horizontally. It is also possible
to visually check the bend-R section.
Y Point the tip of the clamp to the inner side of the ve-
hicle body.
Z Make sure to pass the neutral switch lead through
the hole of the flap.
AA Clamp the seat lock wire to the frame as shown in
the illustration. Secure the clamp to the weld of
the cross member with the frame. Position the
binding section in front of the vehicle body and cut
the tip to be between 1 and 5 mm (0.04 and 0.20
in).
CABLE ROUTING
SPEC
Содержание FZ6-N 2004
