Operation
41
power tilt unit loses pressure.
CAUTION:
ECM01640
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be trail-
ered in the normal running position, use
an additional support device to secure it
in the tilt position. For more detailed in-
formation, see page 47.
4.
Models equipped with trim rods: Once
the outboard motor is supported with the
tilt support lever, press the power trim
and tilt switch “
” (down) to retract the
trim rods.
CAUTION:
ECM00250
Be sure to retract the trim rods complete-
ly during mooring. This protects the rods
from marine growth and corrosion which
could damage the power trim and tilt
mechanism.
EMU30192
Procedure for tilting down (manual
tilt models)
1.
Place the tilt lock lever in the lock posi-
tion.
2.
Slightly tilt the engine up until the tilt sup-
port bar is automatically released.
3.
Slowly tilt the engine down.
EMU33120
Procedure for tilting down (power
trim and tilt models)
1.
Push the power trim and tilt switch “
”
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support knob
becomes free.
2.
Pull out the tilt support knob.
3.
Push the power trim and tilt switch “
”
(down) to lower the outboard motor to
the desired position.
ZMU02306
ZMU02825
DN
ZMU01936
UP
DN
Содержание FT25B
Страница 1: ...OWNER S MANUAL F20A F25A FT25B 65W 28199 7D E0...
Страница 6: ...Table of contents Treatment of submerged motor 78 Procedure 78...
Страница 85: ......
Страница 86: ...YAMAHA MOTOR CO LTD Printed on recycled paper Printed in Japan April 2007 0 5 1...