manualshive.com logo in svg

Yamaha FLIP-X Series, Руководство по обслуживанию

Поделиться
Скачать
Yamaha FLIP-X Series Скачать руководство пользователя страница 32

Safety Instructions

S-24

4.8 Disposal

When disposing of robots and related items, handle them carefully as industrial wastes. Use the correct 
disposal method in compliance with your local regulations, or entrust disposal to a licensed industrial waste 
disposal company.

1. 

Disposal of lithium batteries

When disposing of lithium batteries, use the correct disposal method in compliance with your local regulations, or 
entrust disposal to a licensed industrial waste disposal company. We do not collect and dispose of the used batteries.

2. 

Disposal of packing boxes and materials

When disposing of packing boxes and materials, use the correct disposal method in compliance with your local regula-
tions. We do not collect and dispose of the used packing boxes and materials.

3. 

Strong magnet

w

WARNING 

Strong magnets are installed in the robot. Be careful when disposing of the robot.

See "6. Cautions regarding strong magnetic fields" for detailed information on strong magnetic fields.

FLIP-X_maint_E_V1.50.indb   24

18/05/15   15:01

Содержание FLIP-X Series



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды