Yamaha Fazer FZ6-SAHG Скачать руководство пользователя

Страница: 32 / 100

INSTRUMENT AND CONTROL FUNCTIONS

3-18

EAU13412

Fuel tank breather hose

Before operating the motorcycle:

●

Check the fuel tank breather hose
connection.

●

Check the fuel tank breather hose
for cracks or damage, and replace
it if damaged.

●

Make sure that the fuel tank
breather hose is not blocked, and
clean it if necessary.

EAU13442

Catalytic converters

This vehicle is equipped with catalytic
converters in the exhaust system.

WARNING

EWA10860

The exhaust system is hot after op-
eration. Make sure that the exhaust
system has cooled down before do-
ing any maintenance work.

CAUTION:

ECA10700

The following precautions must be
observed to prevent a fire hazard or
other damages.

●

Use only unleaded gasoline.
The use of leaded gasoline will
cause unrepairable damage to
the catalytic converter.

●

Never park the vehicle near pos-
sible fire hazards such as grass
or other materials that easily
burn.

●

Do not allow the engine to idle
too long.

EAU32980

Seat

To remove the seat

1. Insert the key into the seat lock,

and then turn it counterclockwise.

2. While holding the key in that posi-

tion, lift the rear of the seat up, and
then pull the seat off.

To install the seat

1. Insert the projection on the front of

the seat into the seat holder as
shown.

1. Fuel tank breather hose

2. Original position (paint mark)

1. Seat lock

2. Unlock.

U4S8E1E0.book Page 18 Monday, July 2, 2007 10:33 AM

Содержание Fazer FZ6-SAHG





































































































Результаты поиска

Содержание Fazer FZ6-SAHG

Отзывы:

Похожие инструкции для Fazer FZ6-SAHG

Бренды по названию

Популярные бренды

Yamaha Fazer FZ6-SAHG, Руководство пользователя

Результаты поиска

Содержание Fazer FZ6-SAHG

Отзывы:

Похожие инструкции для Fazer FZ6-SAHG

Бренды по названию

Популярные бренды