Yamaha Electone STAGEA ELB-02, Руководство пользователя

Страница: 57 / 215

3
57
ELB-02 Owner’s Manual
Voice
Controls and Effects
Press the Page buttons to select Page 4.
Effect
You can select the effects applied to each Voice section.
1 Effect Category
You can select the Effect Category applied to each Voice section.
Voice Condition [Page 4]
PRESET
The effect type that best matches and is most suited to the currently selected sound
is automatically selected.
REVERB
Produces a gentle “wash” of aftertones in the sound, recreating the subtle ambience
and depth of actual performance spaces and rooms.
DELAY
Produces delayed distinct repeats of the sound, or echoes. This is also useful for
creating rhythmic repeats in the sound.
ER/KARAOKE
The ER effect isolates only the early reflection components of the reverb sound,
while Karaoke recreates the deep echo effect used in Karaoke sing-along
applications.
CHORUS
Creates a warm effect as if several instances of the same sound were playing at
once. Makes the overall sound richer, “fatter” and more animated.
FLANGER
This creates a metallic periodic “sweeping” effect, similar to Chorus but with a
brighter more resonant sound.
PHASER
Similar to Flanger, this produces rolling timbre changes and a pronounced up/down
filter sweep effect.
TREMOLO/AUTO
PAN
This periodically changes the volume and has the effect of moving the sound image
both front and back, and left and right.
ROTARY SPEAKER
This popular effect (used mainly for electronic organ sounds) recreates the rich,
animated pulsing sound of a rotating speaker horn.
The Rotary Speaker effect can be switched in real time as you play, with the Left
Footswitch (when properly set for Footswitch operation). Keep in mind that the
Rotary Speaker effect CANNOT be turned on only by selecting it. To use the Rotary
Speaker effect, see “Rotary Speaker” on page 60.
DISTORTION This effect adds distortion to the sound.
DIS A combination of Distortion, Delay and Compressor effects.
AMP SIMULATOR
A simulation of a guitar amp or microphone amp.
WAH
This uses an automatic up/down filter sweep to change the timbre of the sound,
producing a “wah-wah” sound.
DYNAMIC
This effect (also called compression) “squeezes” the overall dynamic range of the
sound, and has a gain control—letting you make soft sounds louder, and thus give
more “punch” to the sound.
EQ/ENHANCER
EQ: This processing tool lets you change the level for specific frequency ranges in
the sound, and affects the overall sound quality.
Enhancer: This effect emphasizes and enhances the overtones in the high
frequency sound range overtone—not merely making the sound brighter, but giving
it more clarity and presence.
PITCH CHANGE Changes the pitch of the input signal.
MISCELLANEOUS This category contains a wide range of special effects.
THRU Bypass control. This cancels the effect processing.
1
2
3
4
Effect Category