Yamaha Electone STAGEA ELB-02, Руководство пользователя

Страница: 103 / 215

103
4
ELB-02 Owner’s Manual
Rhythm/Keyboard Percu
s
sion
7
To assign an instrument to a particular key or pedal.
Simultaneously hold down the Data Control button [C] corresponding to
“ASS.”(Assign) and press the key (or pedal) to which the instrument is to be
assigned. The currently displayed instrument will be assigned to the key you
press down as a part of User 1.
When the assignment is complete, the key name and instrument name is
displayed at the bottom of the display. The assignments are saved to the User
memory selected in step 2 (in this example, User 1).
8
Repeat the operation steps above as necessary to construct your
own User Keyboard Percussion set.
To erase one instrument:
Simultaneously hold down the [D] button corresponding to “CLR.”(Clear) in the
display and press the key (or pedal) corresponding to the instrument you wish to
erase.
(A short ‘beep’ sound indicates that the instrument has been erased.)
NOTE
Though 40 User Keyboard
Percussion setups can be
created, they cannot be
memorized to Registration
Memory. Only on/off data
and the Keyboard
Percussion Menu are
memorized to Registration
Memory. If you want to save
the User Keyboard
Percussion setups with the
Registration Memory, save
the data to the USB flash
drive (page 147). 40 User
Keyboard Percussion setups
will be saved to each Unit.
7-1.
While holding down
[C] button...
7-2.
Press the key.
NOTICE
The Keyboard Percussion
on/off data and Menu is
automatically saved to
Registration Memory when
another display is called
up. Make sure to switch to
another display before
turning the power off. A “

”
mark appears at the top left
of the display indicating
that the Registration data
is currently being saved.
Do not turn the power off
while the Registration is
being saved, otherwise the
data will be lost.
1.
While holding down
[D] button...
2.
Press the key.