Yamaha Electone EL-500, Руководство пользователя

Страница: 108 / 184

108
V
oice Edit
8
EDIT Page
Operator
Algorithm Envelope Parameters
Name of the voice to be edited
At the left side of the display is the Algorithm used for this voice.
An algorithm is a kind of “map” that shows how the sound
components of the voice are related to each other. Each voice
has nine separate sound components and they are called
“Operators,” AWM Operator and FM Operators 1 through 8.
NOTE:
The currently selected Operator name is
shown in the dark bar in the middle of
the display.
NOTE:
The Algorithm type used is different
depending on the voices.
3
Begin changing the sound by turning off all Operators, except
Operator 1.
To turn off each Operator:
1 .
First, use the pair of Data Control buttons just below the algorithm
display (below the box 1; the second from the left) to select an
Operator.
The currently selected Operator number is surrounded by the
“Brackets.”
Pressing the
A
button move the “Brackets” counter clockwise,
and pressing the
B
button move the “Brackets” clockwise.
Move the “Brackets” to the Operator 2.
2.
Then press one of the far left pair of Data Control buttons to turn
the selected Operator off.
Reverse display (dark box)
indicates that the Operator is
on; normal display indicates
the Operator is off.
The “Brackets” indicate the
currently selected Operator.
These buttons turn the
selected Operator on and off.
These buttons select the
Operators in order.
3.
Repeat the above process for all of the Operators except Operator 1.
As you turn off each Operator, play the voice and listen to how
the sound changes.B
NOTE:
Although the Operators 5 through 8 are
not shown in the same display, you can
show them by moving the “Brackets” to
the AWM operator or past the FM
operator 4.