Yamaha Electone EL-500, Руководство пользователя

Страница: 103 / 184

103
Music Disk Recor
der
7
PAUSE STOP PLAY SONG SELECT RECORD
UPPER LOWER PEDAL CONTROL UPPER LOWER PEDAL CONTROL
CUSTOM PLAY
SHIFT
RECORD PLAY
FORMAT
SONG
REPEAT
FROM SONG DEL.
SONG COPY
TO
MUSIC DISK RECORDER
TEMPO + –
d L 0 4
PAUSE STOP PLAY SONG SELECT RECORD
UPPER LOWER PEDAL CONTROL UPPER LOWER PEDAL CONTROL
CUSTOM PLAY
SHIFT
RECORD PLAY
FORMAT
SONG
REPEAT
FROM SONG DEL.
SONG COPY
TO
MUSIC DISK RECORDER
TEMPO + –
I n 1
7) Song Delete
You can delete a song on disk by performing this function.
To use Song Delete:
1
Use the SONG SELECT buttons to select the number of
the song you wish to delete.
2
While holding down the SHIFT button, press the SONG
DEL. button.
The letters “dL” appear on the left side of the LED
display, next to the selected song number. RECORD
lamp flashes to indicate that the M.D.R. is ready to
delete the song. If you wish to, you can still select a
different song number in this step by using the SONG
SELECT buttons.
NOTE:
If you want to abort the operation, press STOP button.
NOTE:
XG song data cannot be deleted.
3
Press the RECORD button to execute the Song Delete
function.
The RECORD lamp stops flashing and remains lit,
indicating that the Song Delete function has begun.
When the Song Delete function is completed, the STOP
status is automatically resumed.
8) Disk Copy
1You can duplicate a floppy disk by copying the contents.
Yamaha recommends that you keep two copies of important
data on separate floppy disks by using this function.
1
Prepare the source disk and the formatted blank disk to
be copied.
The disk type of both source disk and destination disk
must be the same. For example, use 2DD for the disk
to be copied (destination) if the source disk is 2DD
type.
Be sure to set the Write-protect tab on the source disk
to ON. On the contrary, set the Write-protect tab on
the destination disk to OFF. The message “Prot” may
appear if you insert the destination disk with the
Write-protect tab ON. In this case, the Disk Copy
function cannot be executed.
2
While holding down the SHIFT button, press the
LOWER button in the RECORD part.
“In 1” appears on the LED display to indicate that the
M.D.R. is ready to execute the Disk Copy.